- MU-MIMO for high throughput
- Up to 1317 Mbps dual-band data rate
- 24V0.5A Passive PoE or IEEE 802.3at Gigabit PoE Port
- Wireless coverage up to 200 meters
Please wait a Moment while we are processing
Please wait a Moment while we are processing
$199.00
Up to 1317 Mbps dual-band data rate and the Gigabit Ethernet port offer you ultra-fast internet connections.
Compliant with IEEE 802.11ac Wave2 and powered by MU-MIMO technology, a single iUAP-AC-LR can communicate with multiple wireless clients at one time, letting you enjoy higher throughput and better experience.
iUAP-AC-LR allows clients supporting either 2.4 GHz or 5 GHz band, or both to connect to it at the same time, tripling the quantity of connected clients of traditional single-band AP.
Built-in high-gain omni-directional antennas guarantee a broader and stable coverage.
Featuring various anti-interference algorithms, the built-in RF enables iUAP-AC-LR to evenly allocate bandwidth resources for multiple users, filter interference, and optimize data rate, offering you a guaranteed signal strength and reliable wireless experience.
iUAP-AC-LR allows you to set multiple SSIDs and add VLAN tags for SSIDs, thus protecting your network.
You can use an IEEE 802.3at-compliant PoE sourcing equipment, or a 24V DC power adapter to power on iUAP-AC-LR.
The ProFi Controller makes it easy to manage and monitor the whole ProFi devices in a real-time manner and cloud services enable a remote and secure access free from the restrictions of device location.
| Product Information | |
|---|---|
| Model | iUAP-AC-LR |
| Category | Ceiling |
| Dimensions | 176*176*43.5 mm |
| Hardware Specifications | |
| Frequency band | 2.4 GHz, 5 GHz |
| Wireless standards | IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac |
| 2.4 GHz data rate | 1 – 450 Mbps |
| 5 GHz data rate | 6 – 867 Mbps |
| Ethernet port | 1*10/100/1000 Base-TX port |
| Button | 1*Reset |
| LED indicator | 1*Power |
| Max. power consumption | 13.5W (Full-load) |
| Power supply standard | IEEE 802.3at & 24V, 0.5A Passive PoE |
| Antenna gain | 3*4 dBi |
| 2.4 GHz Max. output power | 29 +/- 1.5 dBm |
| 5 GHz Max. output power | 26 +/- 1.5 dBm |
| 802.11b RX sensitivity | -94 dBm |
| 2.4 GHz 802.11n (MCS7) RX sensitivity | -73 dBm |
| 5 GHz 802.11a RX sensitivity | -93 dBm |
| 5 GHz 802.11n (MCS7) RX sensitivity | -74 dBm |
| Software Specification | |
| Operating modes | AP, Client+AP |
| Hide SSID | Supported |
| Max. No. of SSID | 2.4 GHz: 8 5 GHz: 4 |
| Max. connected clients | 2.4 GHz: 128 5 GHz: 256 |
| WEP | Supported |
| WPA-PSK | AES/TKIP |
| WPA2-PSK | AES/TKIP |
| WPA | Supported |
| WPA2 | Supported |
| Access control | MAC address-based |
| Adjustable power transmit | Supported |
| Frequency analysis | Supported |
| AP isolation | Supported |
| Connected clients control | Supported |
| RSSI threshold | Supported |
| Transmission Power | Adjustable by 1 dBm |
| WMM | Supported |
| VLAN tagging for SSID | Supported |
| LED indicator control | Supported |
| Diagnostics tool | Ping, Traceroute |
| Scheduled reboot | Supported |
| Reboot at specified interval | Supported |
| Management | Web UI |
| System logs | Supported |
| Firmware upgrade | Local and AC upgrade |
| Reboot | Local and AC reboot |
| Reset | Local and AC reset |
| Backup configuration | Supported |
| Restore configuration | Supported |
| Operating Environment | |
| Default login IP address | 192.168.0.254 |
| Default user name | admin |
| Default password | admin |
| Operating temperature | -10℃ – 45℃ |
| Operating humidity | (10% – 90%) RH, non-condensing |
| Storage temperature | -30℃ – 70℃ |
| Storage humidity | (10% – 90%) RH, non-condensing |
| 01 | iUAP-AC-LR Datasheet(TH) | Datasheet | 2020-08-10 | ||
| 02 | iUAP-AC-LR Datasheet | Datasheet | 2020-06-20 | ||
| 03 | iUAP-AC-LR Firmware V1.0.0.3(7895)_EN | Firmware | 2021-08-03 | ||
| Upgrade Notes:
1. This firmware is only fit for iUAP-AC-LRV1.0 and its firmware version must be in V1.0.0.X or more. 2. Do not downgrade to lower version. If do, it will not allow to change the configurations even damage the router. 3. Do not power off the device when upgrading. 4. Please unzip the file you downloaded and use the file ended with “bin” or “trx” to upgrade your device. 5. Please reset it to factory settings after upgraded it. Release Notes: 1.New guest network function module. 2.Fix the problem that the management VLAN changes without restarting. 3.Fix RSSI reporting error. |
|||||
| 04 | iUAP-AC-LRV1.0 Firmware V1.0.0.1(6674)_CN | Firmware | 2021-01-29 | ||
| Upgrade Notes:
1. This firmware is only fit for iUAP-AC-LRv1.0 and its firmware version must be in V1.0.0.XX or more. 2. Do not power off the device when upgrading. 3. Please unzip the file you downloaded and use the file ended with “bin” or “trx” to upgrade your device. 4. Please reset it to factory settings after upgraded it. Release Notes: 1. Compatible with FCC standard. 2. Compatible with iUAP Software Controller. |
|||||
| 05 | iUAP-AC-LR Installation Guide | Documents | 2020-06-16 | ||
| 06 | iUAP-AC-LR HD Image | HD Image | 2020-06-16 | ||
